Ways for Lenovo Windows 10 Safe Mode

The reasons for seeking solutions to boot Lenovo Windows 10 Safe Mode can be anything. Sometimes, it is an error which is the cause of all the troubles which makes you turn to Safe Mode.

At times, not a single solution to treat error works. It is then that the tech advisers suggest the Safe Mode.

However, without much delay, let us simply jump to the six different manners in which you can boot the laptop in Safe Mode.

Procedures in which you can boot Lenovo Laptop in Safe Mode in Windows 10

If you seek the way in which you can run the system in Safe Mode, we have got plenty. The list contains plenty of procedures and, obviously, each one of them works. So, choose any one of them.

Firstly, go through each of the headings and choose the one which you find convenient. Now, let us commence with the procedure.

Procedure 1: The Shift + Restart on Sign-in Screen

  • In case you find hindrance in logging into your Windows 10 system, but can reach the Sign In screen, proceed to press and hold the Shift button present on the keyboard.
  • While holding it, press the Power button. Then, in the menu that appears before you, click on Restart.
  • Doing this Restarts Windows 10. Then, it will ask you to choose an option. Select Troubleshoot.
  • After that, on the Troubleshoot screen, head to the Advanced options.
  • Next, on the Advanced options screen, proceed to choose the Startup Settings. You may skip or not notice this alternative at first. That depends on your Windows 10 computer. If you do not, click on the link which states “See more recovery options.”
  • Then, click on Startup Settings.
  • Now, Windows 10 displays that you can proceed to Restart the device to alter the options of the advanced boot, including enabling Safe Mode. So, press Restart.
  • Now, after Windows 10 restarts once again, you can proceed to choose the boot options that you want to enable.
  • In order to get into Safe Mode, you face three different options: For Standard Safe Mode, press the 4 or the F4 key on your keyboard. For Safe Mode with Networking, hit 5 or F5. Finally, for Safe Mode with Command Prompt, tap either 6 or F6.

This serves you with all the answers properly. You can get Lenovo laptop Safe Mode in Windows 10. If not, the next one surely will.

Also, you can seek the professional assistance of a technically adept person.

Procedure 2: Interrupt the Boot Process Thrice in a row

In case Windows 10 fails or refuses to boot as usual the third time, the fourth time, by default, it enters in an Automatic Repair mode. Employing this mode, you can simply boot into the Safe Mode.

To bring the system to the Automatic Repair mode, the interruption of the usual procedure of booting that too thrice in a consecutive manner is another method.

  • At first, press the Power or the Reset button which is present on your Windows 10 system to cease it during the boot procedure.
  • In case you touch the Power button, you should keep it pressed for 4 seconds at least to power off the system forcefully.
  • The first thing you will notice when the system enters into the mode of the Automatic Repair is a screen that states that the Operating System is “Preparing Automatic Repair”.
  • After that, you may be asked to opt for an account in order to continue.
  • Next, choose an account which possesses administrator rights, and then type its password. In case you don’t receive this information, proceed to the next step.
  • Now, wait for Windows to initiate an automatic diagnosis of the system.
  • On the “Automatic Repair” screen, proceed to press the “Advanced options” button. After that, opt for Troubleshoot.

However, from here on, the measures or steps that you have to take are similar to those which we have presented in the first method of this article.

Follow the path which we laid down clearly: Firstly, the Advanced Options and from there, the Startup Settings. After that, touch the Restart button. Next, hit the 4 or the F4 button which is present on your keyboard in order to boot the system into Safe Mode.

Then,  press 5 or F5 in order to boot into the “Safe Mode with Networking”. Either that or press 6 or F6 for going to the “Safe Mode with Command Prompt.”

If you didn’t find this method as friendly, the next procedure makes things easier for you.

Procedure 3: Employ the Windows 10 Installation Drive and the Command Prompt

In case you possess a Windows 10 setup, USB memory stick or DVD simply lying around. Or, if you can design one, you can easily employ it to boot the damaged system with Windows into Safe Mode.

  • Click or tap on the link which states “Repair your computer”. It is present on the screen’s bottom left corner.
  • This triggers a window which asks your preference or the option that you want to choose. From there, opt for Troubleshoot.
  • Click or tap on the option Command Prompt, on the screen for Advanced Options screen. (Use  the program of Command Prompt in order to initiate the advanced troubleshooting).
  • Then, in the window of Command Prompt, type a command. You can type or copy and paste: “bcdedit /set {default} safeboot minimal”.
  • Next, press the Enter button present on your keyboard. After a certain moment, it alerts you with a message stating that “The operation completed successfully.”
  • After that, close the Command Prompt and then opt to select Continue the option for which is present on the successive screen. Now, after your PC reboots, Windows 10 starts to initiate and enter into the Safe Mode.
  • At this time, proceed to log in with a user account which holds administrator rights, and also performs the alterations that you desire.

Note: The one issue with this procedure is just that it informs Windows 10 to automatically enter Safe Mode, every time you initiate it until you instruct it not to.

In order to disable this setting, run the same procedure once more and then proceed to type the command: “bcdedit /deletevalue {default} safeboot”.

Procedure 4: Enable Safe Mode Via the System Configuration Tool

If the scenario allows you to log into Windows 10, use the System Configuration tool in order to boot into Safe Mode. The file name msconfig.exe is the identity of the tool.

  • From the taskbar, in the space for search, type the “system configuration”. After that, click on the shortcut for System Configuration.
  • Then, on the window for System Configuration, click on the Boot tab. From there, select the option for Safe Boot. Finally, click on the button which says OK.
  • The system informs you to Restart the system for the fresh setting in order to take effect. If otherwise, you can Restart now. Then, the device boots into Safe Mode automatically.
  • Next, after the rebooting of Windows, the system straight-away goes into Safe Mode.

This procedure is effective in booting Lenovo laptop in Safe Mode in Windows 10. However, if you find this method tiring, the next procedures can help you.

Procedure 5: The Shift + Restart on the Start Menu

This procedure is comparatively easier.

Employ the options which are present in the Start menu. Follow the underlying steps.

  • At first, press and hold down the Shift button on the keyboard and hit Start, Power, and Restart. All the while, you must keep your finger pressed on the Shift key.
  • After that, Windows 10 Reboots and then asks the users to select an option. From there, choose Troubleshoot.
  • Then, head to the Advanced options and then over to the Startup Settings and then Restart. After that, press either 4 or the F4 key in order to initiate the Safe Mode.
  • Next, press the buttons 5 or F5 in order to boot the system into Safe Mode with Networking.

In this way, you can easily enter Lenovo Windows 10 Safe Mode.

For doing this, you can also employ the assistance of an expert professional who can easily cover your concerns.

Procedure 6: Use Settings and Access the Recovery Options to Start Safe Mode

Another procedure to boot into the Safe Mode is using the Settings program. If you can log into the system, this method will be extremely helpful.

  • First of all, launch the Settings application. This brings up some options on-screen.
  • From those, select the one which says Update & Security. Then, on the left panel, proceed to hit Recovery. And then, on the right, click on the button which says Restart Now.
  • Then, when the system Restarts, hit the option to Troubleshoot.

Finally, you must head to the same address as mentioned in every method. Head to the Advanced Options and then go to the Startup Settings.

Then, Restart it. After that, press button 4 or the F4 present on your keyboard in order to Start the system in Safe Mode.

Next, hit the button F5 or simply 5 to boot the system into Safe Mode with Networking. Press either 6 or the F6 button to go to Safe Mode with Command Prompt.

These are the ways for entering Safe Mode from your Lenovo laptop. Furthermore, you can opt for professional assistance to avoid any hassle.

Related Posts