[Fixed] Lenovo Won’t Boot

Lenovo is a prominent name in the world of laptops and desktop computers. Lenovo devices are highly recommended due to their robust compatibility and build quality. But this doesn’t mean that the Lenovo laptops are free from glitches.

One of the most annoying and common glitches of the Lenovo laptop is Lenovo won’t boot issue. Almost every Lenovo user at least once has faced this similar issue with their Lenovo device in their lifetime. If you are among those Lenovo users, then no need to worry.

We have collected all the probable fixes to solve this Lenovo laptop won’t boot Windows 10 issue. The issue generally shows the cursor blinking on your Lenovo PC. The primary reason behind this issue is corrupted or outdated BIOS. Let’s start with the fixes.

How to Fix Lenovo Won’t Boot Issue?

Here we have mentioned numerous solutions. You can really go through them but in the way, we arranged them for you. Because the fixes are ordered as per their ease of application. Let’s start with the easy fixes, first.

Fix 1: Opt for the Power Button 

You should try this first thing first. The Power button of your Lenovo laptop can do wonders while you are stuck with some minor or major problems. Follow this basic troubleshooting to recover your PC.

  1. At first, you can restart your Lenovo laptop. Check if this solves the error.
  2. If that doesn’t work, then shut down the PC.
  3. Disconnect the power cord. 
  4. Press and hold the Power button for 30 seconds.

Check if the Lenovo laptop starts behaving normally after the boot-up.

Fix 2: Perform Factory Reset of your Lenovo Laptop

Most Lenovo laptops come with an in-built Reset switch. This switch is not easy to push and you can’t easily notice the switch. This switch or button comes into a major role-play when you get stuck with issues like this one.

Make sure that your Lenovo laptop has a Reset button. You have to manage a paper-clip or sim-ejector tool. Additionally, It will help you to press the Reset button. Now, let’s check out the steps below.

  1. Initially, you have to unplug the power cord from your PC. 
  2. Find out the place where the Reset button is situated on your laptop. You can find out the button either on the bottom or on the sideways of your Lenovo PC. 
  3. Use the paper clip or the sim-ejector tool to press and hold the Reset button. Perform this step for at least 10 to 15 seconds.
  4. Let the Lenovo PC turn on normally.

This fix should work and the laptop should boot up without any issues.

Fix 3: Perform Power Reset on Lenovo Laptop

If the two fixes haven’t helped you to deal with the Lenovo won’t boot issue, then you can try this hack. Here, you have to opt for a power reset. Go through the guidelines below for this easy procedure.

  1. Flip your Lenovo laptop. You need to detach the physical battery from your Lenovo laptop.
  2. Pull the latch next to the battery slot to remove the battery.
  3. Next, open your laptop and press the Power button. Don’t release the button for at least 30 seconds. This step ensures the drainage of all leftover power from your Lenovo laptop.
  4. After that, place the battery on the laptop. Make sure that it perfectly fits the slot.

Plugin the power cord to your PC and switch on it. Now, test if the fix has worked or not.

Fix 4: Opt-Out CMOS Battery

You should apply this fix if you are enough up-to-date with the equipment and all of your Lenovo laptop. Otherwise, it can worsen the scenario. The CMOS battery is responsible for keeping the BIOS and Date/Time settings updated within the system.

If you don’t have enough tech knowledge, then here are the steps. So go for this particular fix.

  1. Open the back shell of your Lenovo laptop.
  2. You can notice a CMOS battery. It looks like an almost circular battery.
  3. Remove the CMOS battery. 
  4. After 30 seconds, put it back to its position.

Switch on the laptop, afterward. Check whether the solution has fixed the issue.

Fix 5: Replace the BIOS Chip

This solution applies when anyone owns a very old Lenovo laptop. Before you think about replacing your Lenovo laptop with a new one, you can try this fix. 

You just have to remove and replace the old BIOS chip. If you don’t feel much confidence to do the job, then you can seek help from an expert. Check if the laptop boots normally after replacing the BIOS chip. We hope that you have resolved the Lenovo won’t boot issue with the help of this guide.

FAQs Related to Lenovo Won’t Boot Issue: 

Along with the solution to Lenovo won’t boot error, we have also mentioned some common FAQs. Let’s go through them and find out if they help you to deal with such issues.

How Can you Boot from a CD for Lenovo?

Most Lenovo PCs come up with the facility to boot from a CD. Before you opt for this procedure, make sure that your Lenovo laptop supports this feature. Now, you can follow the guidelines given below.

  1. Enter the CD on the CD-drive of your Lenovo laptop. Run the disk and choose the Start option followed by the Shutdown option. Next, choose the Restart option.
  2. After restarting, when the Lenovo or ThinkPad logo appears, you need to enter the BIOS. For this, you need to press the F1 or F2 key repeatedly. 
  3. Use the navigation keys to choose the Boot section. Next, press Enter.
  4. Use the Down Arrow key to select the IDE CD option under Boot Priority Order. After that, press the + key.
  5. Hit the F10 key to confirm the settings. This will reboot the Lenovo PC. When the guidelines prompt, press any key to initiate the booting.

How Can you Enter the Boot-Menu?

If you have doubts about how you can enter the boot menu on your Lenovo laptop, then follow the cited below instructions. You can use this process on Windows 8.1.

  1. Press Win+C. Then click the Settings option.
  2. Use the Change PC Settings option to reach the General settings.
  3. Scroll down to locate the Advanced Startup option. Then, opt for the Restart Now option.
  4. Select the Use A Device menu. Finally, move your cursor to the Boot menu option and click on it.

How Can you Boot Lenovo PC with a USB?

Stick to the guidelines below to perform the task mentioned above.

  1. Make sure that the Lenovo laptop is turned off. Now turn on the PC.
  2. When the PC starts, press either F1 or F2 key.
  3. Enter the BIOS Setup option.
  4. Then use the navigation keys to choose the Boot option. 
  5. Finally, select the USB option.

Leave A Comment


sixty four ÷ eight =

Related Posts